Skip to content

Free water test, and a safe install if you need one: (512) 872-2440

(512) 872-2440

ServicesWell Water Filtration

Well Water Filtration and Treatment in Wyldwood

Your well water is your responsibility, not the city's. We test it first, then put in only the stages it needs to be safe to drink and easy on your plumbing. The work is done with the pump shut down and every new part sanitized before you use a drop.

Technician kneeling in a garage beside a blue pressure tank, twin sediment filters, a stainless UV sterilizer and a treatment tank plumbed on a block wall

What Well Water Filtration Covers

A private well has no utility checking it. What comes out of the tap depends on the rock, the depth of the well, the condition of the casing and what has been happening on the ground nearby. That water can carry sediment, iron, sulfur smell, hardness or bacteria, and it can change after a long dry spell or a heavy rain.

We recommend a system based on your test results. That might be a sediment filter and a carbon stage. It might add iron and sulfur removal, a softener or UV purification. Some homes need two stages. Some need five. We tell you which ones matter and which ones you can skip.

Safety comes first on every job. We kill power to the pump before we cut into a line, install a bypass so you are never stuck without water, and sanitize the system before it goes into service.

What the Work Includes

Testing before anything is sold

We start with a free water test for the basics like hardness, iron, pH and smell. If bacteria or nitrates are a question, we explain how a lab test works and help you get one through our water testing and analysis service.

Sediment pre-filter

Sand and grit wear out every stage after them. A sediment filter at the front protects the rest of the system and your fixtures.

Treatment stages matched to the test

Carbon for taste and odor, an iron and sulfur filter for staining and rotten egg smell, or a softener where the hardness numbers call for one. Each stage has a job. Nothing goes in just to fill the wall.

UV for bacteria

When a test shows bacteria or your well is shallow or older, a UV unit treats water as it flows. It goes after the filters so the light reaches clear water.

Bypass valve and labeled shutoffs

You can isolate the system without losing water to the house. We label every valve so anyone in the family can find it.

Free installation

Free installation comes with the system. You get one clear quote by phone for the equipment, and the labor is not a separate line.

When a Well System Is Worth a Look

  • A sulfur odor at the tap

    A smell like spoiled eggs usually points to hydrogen sulfide gas in the water. You will often notice it most at the hot tap, or first thing in the morning once water has sat in the lines overnight.

  • Rust-colored stains

    Iron leaves orange marks under faucets, rings in the toilet bowl and a dingy tint on white laundry. Left alone, it also builds up inside your pipes and pressure tank.

  • Haze or grit in the glass

    Sand in the faucet screens, or water that turns cloudy after a big storm, means sediment is getting past. Hard rain can also drive surface water toward a well with a worn seal.

  • A new house with a well

    Nobody can tell you when the water was last checked or what the prior owner put in. A test is the safe first step before anyone drinks from it.

  • Family members at higher risk

    Babies, elderly parents or anyone with a weakened immune system raise the stakes. For them, checking for bacteria and nitrates matters more.

How the Job Goes

  1. 1

    Free water test

    We sample at the tap and at the pressure tank and go over the results with you on the spot. If something needs a lab, we say so plainly.

  2. 2

    Written plan and quote

    You get a list of stages, why each one is there and what upkeep it needs. You decide. No pressure.

  3. 3

    Safe install

    We shut off power to the pump, drain the line and lay down covers where we work. Most installs go near the pressure tank and take part of a day.

  4. 4

    Sanitize, flush and check

    New parts get sanitized and flushed before you drink the water. We check for leaks and pressure drop, then show you how to change filters and use the bypass.

What Moves the Cost

Two things set the price: the problems your test turns up and the daily demand your family puts on the system. A well that needs only a sediment stage and a carbon stage runs far less than one dealing with iron, sulfur and bacteria at once. We give you a number by phone after the test, not before.

What the test finds
Every problem in the water can mean one more stage. Iron and sulfur showing up together, or any bacteria, add the most.
Flow rate and household size
More people and more bathrooms call for bigger tanks and higher-flow housings, so pressure stays steady when two showers run.
Space and plumbing layout
How much room sits near the pressure tank, what the pipes are made of and whether a backwash drain line is needed all change the work.
Power for UV or backwash
UV units and some backwashing filters need an outlet close by. If there is not one, we include that in the plan.

Well Water Questions We Hear

Something not covered here? (512) 872-2440

Will I lose water during the install?

Only for a short stretch while we tie into the line. After that the bypass lets the house run while we finish. We tell you before we shut anything off.

Is my well water safe to drink right now?

We cannot say without testing it. Smell and color tell part of the story, but bacteria and nitrates have no taste. Start with the free test, and get a lab test if we recommend one.

Do I need a water softener too?

Only if the hardness numbers back it up. Some wells around here are hard and some are not. We will not add a softener the test does not support, and a salt-free water conditioner is another option for scale.

What warranty comes with the equipment?

We back the systems we install with a lifetime warranty on tanks and ceramic discs, 5 years on the control valve, circuit board and filter media, and 1 year on labor. We go over which parts apply when we give you the quote.

How much upkeep does a well system need?

Sediment and carbon cartridges get changed on a schedule based on your water use. UV lamps are replaced about once a year. We leave you a simple list so nothing gets missed.

Do you serve homes outside Wyldwood?

Yes. We work with well owners in Wyldwood and nearby areas like Cedar Creek, Bastrop and Elgin. Check the service areas page for the full list.

Technician reaching into an open beige weatherproof cabinet to adjust a water softener valve beside a brick house wall

Find Out What Is in Your Well

A free water test gives you real numbers, not a sales pitch. From there we can give you a quote by phone for only the stages your water needs.