Skip to content

Free water test, and a safe install if you need one: (512) 872-2440

(512) 872-2440

ServicesWater Testing & Analysis

Water Testing & Analysis in Wyldwood

We test your water before anyone talks about equipment. We check hardness, chlorine, iron, pH and dissolved solids at your home, take clean samples, and walk you through every number. If your water is fine, we tell you that.

Person at a kitchen sink lining up small vials of tinted water in a clear rack beside an open blue water test kit on a granite countertop

Know what's in your water before you buy anything

A water test tells you what is actually coming out of your tap. We test at your kitchen sink and, when it matters, at other fixtures around your home. Then we sit down with you and go over the numbers in plain words.

We test first because the right fix depends on the result. Soft water does not need a softener. Water that only tastes of chlorine may need a carbon filter and nothing more. Selling a system before testing is guessing, and we don't guess with the water your family drinks.

Most tap water meets federal rules. Testing is not about scaring you. It's about finding the few things worth fixing, like lead from old pipes and fixtures, or iron that stains your laundry.

What we check during your water test

Hardness

We measure calcium and magnesium in grains per gallon. That number tells us whether a water softener or a salt-free conditioner makes sense, or whether you need neither.

Chlorine

Chlorine is the usual cause of a pool smell or bleach taste. Your water supplier adds it to keep water safe in the pipes. If you'd rather not drink it, a carbon filter can take it out once it reaches your home.

Iron, manganese and sulfur

Orange stains, black specks and a rotten-egg smell point to these. We measure the levels so an iron and sulfur removal system, if you need one, is sized correctly.

pH and total dissolved solids

Low pH water can wear on copper pipes over time. Total dissolved solids shows how much is in the water overall and helps decide whether reverse osmosis is worth it for drinking and cooking.

Lead and lab follow-up

If your home has older plumbing or brass fixtures, we talk about lead. Lead and bacteria need a sample sent to an outside lab for a reliable answer. We tell you when that's the case instead of reading it off a test strip.

Results you can keep

You get the numbers written down, what each one means, and what we would do about it, if anything.

Over-the-shoulder view of a technician and homeowner comparing yellow and pink water test vials beside a water softener, brine tank, filter housings and UV unit

Signs it's time to test your water

Bleach taste or smell
A chlorine smell at the tap is common. A test tells you how strong it is and whether a simple filter would handle it.
Stains on fixtures or laundry
Reddish-brown stains usually mean iron. Blue-green stains around drains can mean copper pipes are corroding, which is worth catching early.
Chalky buildup and cloudy glasses
A hard white ring around the faucet or a film left on drinking glasses can come from hardness or from high dissolved solids. Each one has a different fix, and testing tells us which you're dealing with.
Rotten-egg smell
If it's only on the hot side, the water heater may be the cause. If it's hot and cold, sulfur in the water is more likely.
Older plumbing or a new baby
Older homes can have lead solder or brass fixtures. If someone is pregnant or you mix infant formula with tap water, it's worth knowing what's there.
Someone wants to sell you a system
If a salesperson is pushing equipment without testing first, get a test before you sign anything.

How a water test goes at your home

  1. 1

    A short phone call

    We ask what you're noticing, how old your plumbing is, and whether anyone in the house has a reason to be careful about water. Then we set a time that works for you.

  2. 2

    Clean sampling

    We run the cold tap first, wear clean gloves and use fresh sample containers. A dirty sample gives a wrong answer, so we take our time here.

  3. 3

    Tests at the tap

    Hardness, chlorine, iron, pH and dissolved solids are read right in your home, usually while you watch. Anything that needs a lab gets sealed, labeled and sent out.

  4. 4

    A straight answer

    We go over the results with you. If your water is fine, we say so. If a system would help, we explain which one and why, and give you a quote. You don't have to decide that day.

What moves the cost after testing

The in-home water test is free. If the results point to a system, its price depends on a few things we can only judge once we've seen your home. You get a written quote with each line broken out, and installation is free.

Outside lab tests
Most checks happen on site. If you want lab testing for lead, bacteria or a specific contaminant, the lab fee depends on which tests are run. We tell you the cost before anything gets sent.
What the results show
One issue, like chlorine taste, often needs one piece of equipment. Hardness plus iron plus odor may need two or more, and that changes the price.
How much water your home uses
A house with four bathrooms and a big family runs a lot more water through a system than a couple in a two-bedroom home. Higher daily use calls for larger equipment, and larger equipment costs more.
Where the main line comes in
Space, access and the condition of the pipe where your water enters the house affect how the equipment is set and what parts it takes.

Water testing questions

Is the water test really free?
Yes. The in-home test costs nothing and comes with no obligation to buy. If you want extra lab tests beyond what we do on site, we tell you what they cost before you agree to them.
How long does the test take?
The on-site part usually takes less than an hour, including going over the results with you. Lab results take longer, and we call you when they're back.
My water already meets standards. Why test it?
Your supplier tests water at the treatment plant, not at your faucet. Your own pipes and fixtures can add things along the way, like lead or copper. A test at your tap shows what you're actually drinking.
Can't I just use a hardware store test strip?
Strips are fine for a rough idea of hardness or chlorine. They are not reliable for lead or bacteria, and they can be off on iron. We use calibrated meters on site and send out samples when accuracy really matters.
Will you try to sell me a water softener?
Only if your hardness reading supports it. Plenty of homes don't need one. If the numbers say your water is fine, that's what we'll tell you.
If I buy a system after the test, what warranty comes with it?
We back the systems we install with a lifetime warranty on tanks and ceramic discs, 5 years on the control valve, circuit board and filter media, and 1 year on labor. We go over which parts apply when we give you the quote.
Technician reaching into an open beige weatherproof cabinet to adjust a water softener valve beside a brick house wall

Find out what's in your water

Pick up the phone and we'll schedule a free water test at your home in Wyldwood, or out in Manor or Elgin. We read the numbers with you and tell you plainly what they mean for your family.